IFlight Borg H7 Stack ( Borg 60A ESC 4-6S )

IFlight Borg H7 Stack F722 Flight Controller with Borg 60A ESC 4-6S Mount Pattern: 30.5*30.5φ4 for RC FPV Parts

• Introducing the All-New BLITZ H7 Flight Controller – Power Meets Versatility!
• The BLITZ H7 Flight Controller is specifically designed for 5-10 inch FPV drones, delivering stable and outstanding performance to elevate your flying experience. Equipped with dual camera input support, it enables flexible visual setups for diverse FPV scenarios, while its support for 4-12S battery power supply ensures strong adaptability and lasting flight power.
• Boasting cutting-edge technology and reliable design, the BLITZ H7 Flight Controller combines compatibility and performance seamlessly, making it the ideal core component for your 5-10 inch FPV drone build – unlock new possibilities with every flight!

• Supports 4-12S battery power supply, adapts to different 5-10 inch FPV drone configurations, and ensures stable power output.
• Integrated 12V BEC provides stable power for your VTX system and allows remote control to switch it on and off.
• Adopts FPC cable connection with the ESC for more reliable and stable signal transmission, while other interfaces use SH1.0 lock connections to prevent loose connections during flight.
• Supports dual camera input, allowing for switching between two cameras freely via the remote control to meet different FPV viewing needs in various flight scenarios.
• Supports dual gyroscopes, which enhance flight stability and accuracy, ensuring smooth and precise control even in complex flight environments.

• Input voltage: 4-6S; Support LIHV battery
• MCU: STM32H743VIH6
• Gyro: ICM42688*2
• Barometer: SPA06-003
• OSD Chip: AT7456E（LGA）
• Flash: 32MB (Blackbox flash)
• UARTS: 7
• Motor outputs: 8
• I2C serial: I2Cx2
• VTX protocol: support DJI MSP/Smartaudio/IRCTramp/HDZero
• LED controller: Yes
• Beeper pad: Yes
• Betaflight Firmware target: IFLIGHT_BORG_H7
• Mount pattern: 30.5x30.5φ4
• Dimensions: 37.5x37.5mm±1
• Weight: 17g±1
• BEC: 5V 2.5A, 12V 2A (12V with VTX switch)

• UART 1 for VTX HD / Analog
• UART 2 for Receiver
• UART 3 for GPS or other sensors that require a serial port
• UART 4 for GPS
• UART 6 for ESC Telemet
• UART 7 for GPS or other sensors that require a serial port
• UART 8 for GPS or other sensors that require a serial port
• Mode Command

• resource PINIO 1 D10
• set pinio_config = 1,1,1,1
• set pinio_box = 40,41,255,255
• set box_user_1_name = VTX_ON_OFF
• aux 0 40 8 900 2100 0 0
• save

• resource PINIO 2 D11
• set pinio_config = 1,1,1,1
• set pinio_box = 40,41,255,255
• set box_user_2_name = CAM_SW
• aux 1 41 9 900 2100 0 0
• save

• Product Name: Borg 60 ESC
• Input Voltage: 4-6S(DC 14-26.1V); Support LIHV battery
• Max. Continuous Current: 60A
• Max. Burst Current: 65A (10s)
• MCU: STM32G071N
• Driver: FD6288
• Firmware: BL32 (32bit ESC)
• Target: IFLIGHT_BLITZ_G3 32.9
• Current Sensor: Yes(1/200)
• BEC: No
• Telemetry: Supported
• Bidirectional DSHOT: Supported
• Dimensions: 52*45.5mm±1
• Mounting Holes: 30.5*30.5φ4
• Weight: 15.5g±1
• Protocol: Supports DShot150/300/600, MultiShot, OneShot, etc

• 1 x Borg H7 Flight Controller
• 1 x Borg 60 ESC
• 1 x Cable set