Note: If the package weight exceeds 4kg, the system will indicate that shipping is unavailable.
Solutions: 1. Split your purchase into multiple orders. 2. Please let me know the product model and quantity, and I will provide a quote that includes both the product cost and shipping fees.
CUAV HV PM High Voltage Power Module 60A（3S-14S）
CUAV HV PM High Voltage Power Module 60A（3S-14S）
Precio habitual
$40.53 USD
Precio habitual
$0.00 USD
Precio de oferta
$40.53 USD
369 en existencias
Cantidad
No se pudo cargar la disponibilidad de retiro
HV_PM Power Module 10-60V（3-14S）
Trait
Ver todos los detalles
Trait
- Support higher input voltage: 10v-60v (3s~14s battery)
- More accurate current and voltage detection: voltage detection accuracy: + -0.1V; Current detection accuracy: +-0.2aA
- Support higher power port output current: 5A. Maximum (detection) current: 60A
- Provide 5V voltage output and maximum 5A current to power the flight control
- Detect the current voltage output analog signal to the flight control
-
Detect the current system current output analog signal to the flight control
- Because the maximum detection voltage of the PIX ADC is 3.3, the maximum current detection can only be supported by 60A.
- Size: 320mm*20mm
- Weight: 29g
- HV-PM Power module (welded XT60 cable connector) *1
- Data cable *1
- Packaging bag *1
- Connect to the ground station using USB or data transmission
- Initial Settings >> Optional Hardware >> Battery Detector
- Select the monitor :4; Sensor O; APM version 4; Filling partial pressure ratio 18; Fill in amps per volt :24
-
Manual calibration voltage
- Because the PM module is an analog sensor device, there may be some differences, and better accuracy can be obtained by calibrating parameters
- ultimeter or BB sound (calibration voltage used)
- Use battery power and connect to the ground station 2: Use a multimeter or BB sound to measure the current battery voltage
- Select sensor version 0, input the measured battery voltage into the current measured voltage into the box, click the mouse or press the TAB key, the ground station will automatically calculate a partial voltage ratio coefficient and automatically save and write to the flight control
- The calibration is complete, and the current does not need to be calibrated.
