Holybro Kakute F722 Stack

Feature

• High-performance STM32 F722 MCU with speeds up to 216MHz.

• ICM42688P gyroscope, independent low-noise power supply.

• Various Ports for quick & easy setup: ESC port, Digital VTX port, Analog VTX port, Receiver port, and LED port.

• Built-in analog video OSD, 16 Mbytes black box,

• High power synchronous rectifier BEC, supports up to 8S input and provides stable 9V/3A & 5V/2A output.

Specification:

• MCU: STM32F722 32-bit processor, 216MHz, 256Kbytes RAM, 512Kbytes Flash

• IMU: ICM42688-P (SPI)

• Barometer: BMP280

• OSD: AT7456E

• 5x hardware UARTS (UART1,2,3,4,6)

• 7x PWM Outputs (6 Motor Output, 1 LED)

• Onboard 16 Mbytes for Blackbox logging

• Battery input voltage: 3S - 8S

• BEC: 9V/3A, 5V/2A, 3.3V/0.2A

• Connector

  • 2x JST-SH 8pin port for ESC

  • 1x JST-SH 6pin port for HD VTX

  • 2x JST-SH 4pin port for Receiver & Analog Camera

  • 1x JST-SH 3pin port for LED

• USB Type -C

• Dimensions: 35x35mm

• Mounting Holes: Standard 30.5 x 30.5

• Weight: 8g

• User Manual & Pinout

• 1x Kakute F722 Flight Controller

• 4x M3 Silicon Grommets

• 1x JST-SH1.0_8pin 150mm Cable (For ESCs)

• 2x JST-SH1.0_6pin 80mm & 150mm Cable (For DJI Air Unit)

• 1x JST-SH1.0_6pin Colored Silicon 150mm Cable (For Caddx HD System and other VTX)

• 1x JST-SH1.0_4pin to Dupont 150mm Cable

• 1x JST-SH1.0_3pin to Dupont 150mm Cable

• 1x JST-SH1.0_4pin to Molex1.25 150mm Cable

Tekko32 F4 4in1 50A ESC(AM32)

PIN MAP

Fast F4 MCU @150Mhz / PWM output up to 96K / 4~6S / AM32 / 30x30

Features:

• New and faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz)

• PWM Frequency: 16k to 96k

• Separate drive & control circuit, this broadens the current capability of the drive circuit while reducing the electrical interference to the control circuit.

Tekko32 F4 Metal 4in1 65A ESC(AM32)

PIN MAP

F4 MCU @150Mhz / Metal-Cased MOSFET / PWM output: 16k ~96k PWM / 4~6S / AM32
Powerful & reliable metal-cased MOSFET 4in1 ESC with smooth control and quick response.

Features:

• New & faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz)

• PWM Frequency: 16k to 96k
• Metal-cased MOSFET for excellent heat dissipation
• Massive on-board capacitance for noise filtering at 2068uf
• 3 oz copper PCB design to allow bigger current and better heat dissipation
• Separate drive & control circuit, this broadens the current capability of the drive circuit while reducing the electrical interference to the control circuit.

• 1x  Kakute F722 

• 1x  Tekko32 F4 4in1 50A ESC/ Tekko32 F4 Metal 4in1 65A ESC

• 1x  Electrolytic capacito: 1000uF 35v 

• 1x  8pin to 8pin 1mm pitch 65mm cable

• 1x  8pin to 8pin 1mm pitch 25mm cable

• 1x  JST SH 6pin to JST GHR 8pin 80mm &150mm cable (for DJI/Caddx HD System)

• 1x  JST SH 6pin 100mm cable(for Caddx HD Systems)