IFlight BLITZ Mini F745 Stack (BLITZ Mini E55S 4IN1 ESC 2-6S)

IFlight BLITZ Mini F745 Stack W/ BLITZ Mini F745 Flight Controller / BLITZ Mini E55S 4IN1 ESC 20mm for RC FPV Racing Drone Parts

• Improved circuit design, better components, and lower electrical noise!

• DJI HD VTX Connector (Plug-and-Play / No soldering required)

• FC indicator LEDs for visual debugging

• Support Betaflight, INAV, Ardupilot firmware

• MCU: STM32F745

• Gyro: ICM42688

• Barometer: DPS310

• OSD Chip: AT7456E

• Flash: 16MB (Blackbox flash)

• UARTS: 6

• Smartaudio / IRC Tramp VTX protocol supported

• LED controller: Yes

• Beeper pad: Yes

• Firmware target: IFLIGHT_BLITZ_F7_AIO

• Mount pattern: 20*20mm/φ4

• Dimensions: 30.5*27 mm

• Weight: 4.8g

• BEC: Output 5V 2.5A continuous output current, 3A peak current (15 seconds)

• BF Firmware target: IFLIGHT_BLITZ_F7_AIO

• Ardupilot Firmware:arduplane_with_bl

• UART 1 for VTX HD / Analog

• UART 2 for a Receiver

• UART 3/4/5 for GPS or other sensors that require a serial port

• UART 6 for ESC Telemet

• Mounting Holes: 20*20mm/Φ4mm

• Weight: 11.3g

• Supports 2-6S lipo input

• MCU: BB21

• Constant: 55 Amps

• Burst: 65 Amps

• Telemetry Output: No

• Current sensor: Yes

• BEC: No

• Current rate: 300

• Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.

• Target: Q-H-25 16.7(BlheliS) / Bluejay Q-H-50 (Bluejay)

• 1 x BLITZ Mini F745 Flight Controller

• 1 x BLITZ Mini E55S 4-IN-1 2-6S ESC

• 1 x silicon grommets

• 1 x wire harness for F745 Flight controller

• Please use our GoogleDrive Database to download the Ardupilot firmware of the FC