IFlight IPower GBM2804H-100T / GM2804 Brushless Gimbal Motor/ With AS5048A Encoder/Aluminum Case

IFlight IPower GBM2804H-100T / GM2804 Brushless Gimbal Motor/ With AS5048A Encoder/Aluminum Case for Camera Stabilizing Systems

Model: GBM2804H-100T

• Motor Out Diameter: Ф35±0.05mm

• Configuration: 12N/14P

• Motor Height: 15±0.2mm (Included with Encoder housing)

• Hollow Shaft(OD): Ф7-0.008/-0.012 mm

• Hollow Shaft(ID): Ф5+0.05/+0 mm

• Wire Length: 300±3mm

• Cable AWG: #28

• Motor Weight: 39±0.2g

• Wire plug: N/A

• No-load current: 0.07±0.05 A

• No-load volts: 10 V

• No-load Rpm: 1468~1622 RPM

• Load current: 0.8A

• Load volts: 10 V

• Load torque(g·cm): 250-350

• Motor internal resistance: 10Ω±5%(Resistance varies with temperature)

• High voltage test: DC500V 1mA @2sec

• Rotor housing runout: ≤0.1mm

• Steering (axle extension): clockwise

• High-low temperature test:

• High temperature: Keep at 60℃ for 100 hours, and the motor can work normally after 24 hours at room temperature

• Low temperature: Keep at -20℃ for 100 hours, and the motor can work normally after 24 hours at room temperature

• Maximum power: ≤25W

• Working current: 2-3S
  Working temperature: -20~60℃;10~90%RH