Holybro NEW M9N/ M10 GPS V2

$39.19 USD

~~$0.00 USD~~ $39.19 USD

할인 품절

Color M9N Standard M9N Secondary GPS M10 Standard M10 Secondary GPS

재고 369개

Holybro NEW M9N/ M10 GPS V2 IST8310 Compass Accurate Positioning High-gain antenna IP67 water & dust resistance for RC FPV Drone

Description

The M9N/M10 V2 GPSuses multi-constellation GNSSpowered by M9N/M10, a concurrent GNSS receiver that can receive and track multiple GNSS systems. Owing to the multi-band RF front-end architecture, all four major GNSS constellations, GPS, Galileo, GLONASS, and BeiDou, can be received concurrently.
The V2 design now comes with a more robust casing and an IP67 water&dust resistance rating.
It comes with a built-in IST8310 compass and tricolored LED indicator. There are 2 different connector options for different purposes. This module ships with a baud rate of 115200.
The high-gain 25 x 25 mm patch antenna provides excellent performance, and the omnidirectional antenna radiation pattern increases flexibility for device installation. It features active circuitry for the ceramic patch antenna and a rechargeable backup battery for warm starts.

Feature

M9N or M10 GNSS Receiver
Accurate Positioning
Fast Navigation Update Rate
IST8310 Compass
High-gain 25*25*4mm antenna
RGB UI LED controlled by the flight controller
IP67 water & dust resistance

Changes From The V1 design

New casing with IP67 rating
Added SAW filter and receiver shielding for better signal integrity
Removed buzzer and safety switch to reduce EM/RF interference
Removed safety switch LED and GPS Fix LED
Only the RGB UI LED controlled by the flight controller is present for better status recognition

Specifications

Holybro M10 GPS

Holybro M9N GPS

GNSS Receiver

M10

M9N

Number of Concurrent GNSS

Up to 4 GNSS

BeiDou

Galileo

GLONASS

GPS

QZSS

Frequency Band

GPS L1

Galileo E1

GLONASS L1

BeiDou B1

SBAS L1

QZSS L1

Compass

IST8310

Output Protocol

U--

NMEA

Accuracy

2.0m CEP

1.5m CEP

Nav. Update Rate

Up to 25 Hz (single GNSS),

Up to 25 Hz (4 concurrent GNSS)

Up to 10 Hz (4 concurrent GNSS)

GNSS Augmentation System

EGNOS, GAGAN, MSAS, and WAAS

QZSS: L1S

Default Baud Rate

115200

Input Voltage

4.7-5.2V

Connector Type

JST-GH-10pin

JST-GH-6pin

Molex 1.25mm 6pin & 4pin & 3pin (not available for V2)

Antenna

25 x 25 x 4 mm ceramic patch antenna

Antenna Gain

1.5dbi

Antenna LNA Gain

22dB

Power consumption

Less than 200mA @ 5V

Operating Temperature

-40~80°C

Dimension

φ51 x18.5 mm

Weight

36.8g

IP Rating

IP67

Cable Length

26cm (42cm cable purchase separately)

Other (V2)

High-performance SAW Filter

Added RF shielding on the receiver module

LNA MAX2659ELT+ RF Amplifier

Rechargeable Farah capacitance

Low-noise 3.3V regulator

Note

This LED is supported in PX4 1.14, ArduPilot 4.4.0 & later. (More info)
Ardupilot User: If unable to perform normal compass calibration "compass dance" for any reason, set parameter COMPASS_ORIENT=6 (Yaw270) for proper compass orientation.

PIN MAP

The difference between the two cable options

Holybro M9N/M10 GPS (JST GHR1.25mm 10pin cable):

This option is the most common; it is used on the This connector can be used on Pixhawk Standard Flight Controller 10-pin “GPS Module” or "GPS1" input port.

Holybro M9N/M10 Secondary GPS (JST GHR1.25mm 6pin cable):

This connector can be used on Pixhawk Standard Flight Controller 6-pin“UART & I2C” or "GPS2" input port as a secondary GPS. This GPS is also compatible with the CubeFlight ControllerGPS2 Port.

Package Includes: