Holybro PMW3901 Optical Flow Sensor Compatible
Holybro PMW3901 Optical Flow Sensor Compatible
정가
$18.53 USD
정가
$0.00 USD
할인가
$18.53 USD
재고 369개
수량
픽업 사용 가능 여부를 로드할 수 없습니다.
Holybro PMW3901 Optical Flow Sensor Compatible with Pixhawk 6C PX4 Guide / Ardupilot For RC FPV Drone
Product Description:
The Holybro PMW3901 Optical Flow Sensor is a UART version of PMW3901 module with built in BEC. It comes pre-solder with 6pin JST GH connector made to connect right to TELEM ports on most flight controller. Compatible with PX4
(PX4 Guide)
& Ardupilot (Data format same as discontinued product
CX-OF
).
Technical details:
Dimension: 14x11x5mm
Weight: 0.6g
Interface: UART
Baud rate: 19200
FPS: 95hz
Power: 2.0~3.6V
Current: 10mA
Data Format:
byte0: header (0xFE)
byte1: number of data bytes (0x04)
byte2: x-motion high byte
byte3: x-motion low byte
byte4: y-motion high byte
byte5: y-motion low byte
byte6: checksum
byte7: surface quality
byte8: footer (0xAA)
Package Included
1x PMW3901
1x GH6P 170mm Cable(installed)
1x TPU Protective Case Shell
