제품 정보로 건너뛰기
1 4

IFlight BLITZ Mini F7 Stack (BLITZ E55 4in1 ESC 2-6S/ BLITZ Force 5.8GHz 600mW Adjustable VTX)

IFlight BLITZ Mini F7 Stack (BLITZ E55 4in1 ESC 2-6S/ BLITZ Force 5.8GHz 600mW Adjustable VTX)

정가 $38.84 USD
정가 $0.00 USD 할인가 $38.84 USD
할인 품절
Color

재고 369개

수량

IFlight BLITZ Mini F7 Flight Controller W/ BLITZ E55 4in1 ESC 2-6S/ BLITZ Force 5.8GHz 600mW Adjustable VTX for RC FPV Drone

Features
  • Improved circuit design, better components and lower electrical noise!

  • DJI HD VTX Connector (Plug-and-Play / No soldering required)

  • FC indicator LEDs for visual debugging

Changelog
  • October 20, 2023: Flight control Blackbox flash capacity changed from 16MB to 8MB

  • April 6, 2024: The flight control is updated to version V1.2, and the gyroscope is changed from BMI270 to ICM42688.

  • June 27, 2024: Since BLheli32 Configuration is closed due to regulatory issues, if you need to adjust the parameters of this ESC, please download "BLHeliSuite32Test" in the "Download" column of this page.

FC Specifications
  • MCU: STM32 F722

  • Gyro: ICM42688

  • Barometer: DPS310

  • OSD Chip: AT7456

  • Flash: 8MB (Blackbox flash)

  • UARTS: 6

  • Motor outputs: 4x (SH1.0 connector)

  • I2C serial: SDA / SLA pads

  • Smartaudio / IRC Tramp VTX protocol supported

  • LED controller: Yes

  • Beeper pad: Yes

  • Firmware target: IFRC-IFLIGHT_BLITZ_F722

  • Mount pattern: 20x20 mm / 4mm PCB hole diameter, silicon grommets for M3 screws

  • Dimensions: 30.5x27 mm

  • Weight: 5g

Wiring Suggestion
  • UART 1 for VTX HD / Analog

  • UART 2 for a Receiver

  • UART 3/4/5 for GPS or other sensors that require a serial port

  • UART 6 for ESC Telemetry

ESC Specifications
  • Mounting Holes: 20*20mm/Φ4mm

  • Weight: 11.3g

  • Supports 2-6S Lipo input

  • MCU: G071

  • Constant: 55 Amps 

  • Burst: 65 Amps

  • Current sensor: Yes

  • BEC: No

  • Current rate: 200

  • Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.

  • Firmware: BLHeli 32

  • Target: IFLIGHT_BLITZ_G071_01 32.9

  • Firmware: BLHeli 32

BLITZ Force 5.8GHz 600mW Adjustable VTX:
  • Power: PIT/25/200/400mW/600mW

  • Antenna interface: MMCX

  • VTX protocol : IRC Tramp

  • Output 40 channels. 

  • Size: 29*29mm

  • Mounting pattern: 20*20Φ3/25*25 mmΦ2

  • Weight: 4g

Note
  • If you need to use the ESC in the iH3 O3 Frame kit, please remove the capacitor after receiving the ESC, and then install the ESC.

 
전체 세부 정보 보기

Collapsible content

Collapsible row

Collapsible row

Collapsible row