MATEKSYS MR24-30-TX / MR900-30-TX

MATEKSYS MR24-30-TX / MR900-30-TX MLRS MAVLINK 2.4GHZ TX MODULE KIT 2.4G LoRa 30 dBm RF Power For RC FPV Long Range Drone Parts

• mR24-30-TX / mR900-30-TX
• STM32G431KB, mLRS firmware
• LoRa SX1281 with TCXO / LoRa SX1262 with TCXO
• PA/LNA SKY65383-11
• RF Frequency: 2.4GHz ISM / 900MHz (868MHz, 915MHz FCC)
• RF power: 13dBm(min) / 20dBm / 24dBm / 27dBm / 30dBm(1000mW) -mR24-30-TX
• 915MHz RF power: 21dBm(min) / 22dBm / 24dBm / 27dBm / 30dBm(1000mW)-mR900-30-TX
• 868MHz RF power: 24dBm(min) / 24dBm / 24dBm / 27dBm / 30dBm(1000mW)-mR900-30-TX
• Antenna connector: IPEX MHF-1 to SMA/RP-SMA
• mRx-Tx Adapter
• Built-in HC-04 Bluetooth module
• Built-in 5V fan controller, running if ourput power>=500mW
• TX2: RC IN(CRSF)
• one buttom for DFU mode and Bind
• Red and Green LED for mLRS status
• Blue LED for bluetooth status
• Power supply: 5-13V DC @ JR_PIN3 (VIN)

• 1x mR24-30-TX
• 1x IPEX MHF1 to SMA adapter cable 5cm
• 1x IPEX MHF1 to RP-SMA adapter cable 5cm
• 1x 5V Fan (25*25*10mm) and some screws

• [Red flashing 2Hz], not connected to transmitter
• [Green flashing 1Hz], connected to transmitter
• [Red and Green alternately ], Binding mode enabled

• After powering on, press the bind button (for ca. 4 seconds) on the receiver. When in bind mode, the green and red LEDs will blink alternatively with ca 2.5 Hz.