ELRS 2.4G PWM 7CH CRSF Receiver
ELRS 2.4G PWM 7CH CRSF Receiver
Обычная цена
$6.48 USD
Обычная цена
$0.00 USD
Цена со скидкой
$6.48 USD
В наличии: 369
Количество
Не удалось загрузить сведения о доступности самовывоза
ELRS 2.4G PWM 7CH CRSF Receiver Support ELRS 3.2 PWM/CRSF Protocol Copper Pipe Antenna For RC FPV Drone
ELRS 2.4G Receiver With Seven-Channel PWM Reception.
Firmware version: 3.2.0( Note: The remote controller needs to be version 3.0.0 or above to be matched and used. )
Independent PWM Channel Output, suitable for fixed wing vehicles, ships and other models installed.
It also supports CRSF output. The two output signals can be switched.
The PWM 6CH/7CH CRSF switch is easy to switch without rebrushing the firmware
Turn on the receiver WI-FI network,
1. Use the lua menu of the transmitter to activate the WI-FI of the receiver when it is connected to the high-frequency head
2. When the high-frequency head is not connected, power on for one minute, and the receiver automatically enters WI-FI
Search for WIFI on your computer or phone
WIFI hotspot name: ExpressLRS RX
Connection password (all lowercase) : expresslrs
The solution for not entering the WiFi mode:
power on the receiver three times until the receiver LED starts to blink twice (which means it has entered the binding mode). In the elrslua script, press the bind on the radio. Then go to the wifi connection and select "Enable RX WiFi" PS. If it does not bind, please ensure you are using the main release version (i.e., 3.x.x).
