Note: If the package weight exceeds 4kg, the system will indicate that shipping is unavailable.

Solutions: 1. Split your purchase into multiple orders. 2. Please let me know the product model and quantity, and I will provide a quote that includes both the product cost and shipping fees.

1 6

CUAV HV PM High Voltage Power Module 60A（3S-14S）

CUAV HV PM High Voltage Power Module 60A（3S-14S）

$40.53 USD
$0.00 USD $40.53 USD
促销 售罄
0 units sold · 0 people bought this
Color
Model

369 件存货
HV_PM Power Module 10-60V（3-14S）

Trait
  • Support higher input voltage: 10v-60v (3s~14s battery)
  • More accurate current and voltage detection: voltage detection accuracy: + -0.1V;   Current detection accuracy: +-0.2aA
  • Support higher power port output current: 5A.   Maximum (detection) current: 60A
Main function
  • Provide 5V voltage output and maximum 5A current to power the flight control
  • Detect the current voltage output analog signal to the flight control
  • Detect the current system current output analog signal to the flight control
     
  • Because the maximum detection voltage of the PIX ADC is 3.3, the maximum current detection can only be supported by 60A.
Specification
  • Size: 320mm*20mm
  • Weight: 29g
Products contain
  • HV-PM Power module (welded XT60 cable connector)  *1
  • Data cable   *1
  • Packaging bag   *1
Ground station setup
  • Connect to the ground station using USB or data transmission
  • Initial Settings >> Optional Hardware >> Battery Detector
  • Select the monitor :4;   Sensor O;   APM version 4;   Filling partial pressure ratio 18;   Fill in amps per volt :24
  • Manual calibration voltage
     
  • Because the PM module is an analog sensor device, there may be some differences, and better accuracy can be obtained by calibrating parameters
Preparation before calibration:
  • ultimeter or BB sound (calibration voltage used)
Calibration voltage steps:
  • Use battery power and connect to the ground station 2: Use a multimeter or BB sound to measure the current battery voltage
  • Select sensor version 0, input the measured battery voltage into the current measured voltage into the box, click the mouse or press the TAB key, the ground station will automatically calculate a partial voltage ratio coefficient and automatically save and write to the flight control
  • The calibration is complete, and the current does not need to be calibrated.

查看完整详细信息

Contact us

18680670035@163.com