Note: If the package weight exceeds 4kg, the system will indicate that shipping is unavailable.

Solutions: 1. Split your purchase into multiple orders. 2. Please let me know the product model and quantity, and I will provide a quote that includes both the product cost and shipping fees.

Holybro PM03D Power Module

$50.89 USD

~~$0.00 USD~~ $50.89 USD

促销售罄

Color PM03D PM03D (Without XT30)

367 件存货

Holybro PM03D Power Module Compatible Flight Controller Uses I2C Power Monitor W/ XT-30 XT-60 Connectors 6S Lipo for FPV Drone
Note

The full setup guide can be foundhere.
This PM uses I2C digital signal data output, Compatible with Pixhawk 5X/6X Series .
- NOT compatible with flight controller that uses analog PM such as the Pixhawk 6C & Mini, Pixhawk4 & Mini, pix32 v5, or Durandal flight controllers.
Power Module Comparison Table

Overview

PM03D provides regulated power supply as well as current consumption and battery voltage measurements via I2C digital protocol all through a 6pin 2.00mm CLIK-Mate cable. Compatible with a flight controller that uses an I2C power monitor such as the Pixhawk 5X and up.

Features

It is designed for multi-rotors like the X500 V2. It has both XT-30 & XT-60 connectors preinstalled for motor ESCs and Battery, as well as two 5V BEC and a selectable 8V/12V output for different kinds of peripheral devices.

•   Plug & play, no additional setup required for QGroundcontrol & Mission Planner
•   XT-30 connectors and solder pads for easy motor ESC connection
•   Onboard voltage regulators: two 5.2V & one selectable 8V/12V
•   5V/A ports for powering companion computer or peripheral devices
•   Selectable 8V or 12V triple row pin header for powering peripheral device

Technical Specification

Maximum input voltage: 6S battery
Rated current: 60A
Max current: 120A (<60 Sec)
Max current sensing: 164A
Connections
- XT-60 for battery
- XT-30 for motor & peripheral device (battery voltage)
- Solder pads in each corner (battery voltage)
- CLIK-Mate 2.0mm for flight controller (5.2V/3A standalone BEC)
- JST GH 4pin (5.2V/3A, BEC shared with 5.2V triple row pin header)
- 2x Triple row pin header (5.2V/3A, BEC shared with JST GH 4pin)
- 2x Triple row pin header (8V or 12V selectable by moving header jumper, 3A)
Dimension: 84*78*12mm (excluding wires)
Mounting: 45*45mm
Weight: 59g

The XT60 plug and 12AWG wire that PM03D comes with is rated for 30A continuous current and 60A instantaneous current (<1 minute). If a higher current is being used, the plug type and wire size should be changed accordingly.

Package Includes