Holybro SiK Telemetry Radio - Long Range 1W 915MHz Open Source SIK Firmware

Overview

• This Holybro SiK Long Range Telemetry Radio is a small, light, and inexpensive open-source radio platform with a maximum 50 kilometres range (outdoors, line-of-sight range).

• This radio is plug-and-play, ready for all Pixhawk Standard and other similar flight controllers, providing the easiest way to set up a telemetry connection between your controller and a ground station. It uses open-source firmware that has been specially designed to work well with MAVLink packets and to be integrated with the Mission Planner, Ardupilot, QGroundControl, and PX4.

• The radios are available in 915 MHz or 433 MHz versions. Please purchase the model that is appropriate for your country/region.

• FCC ID: 2BNF8-HT051WRF915 (100mW, 915.06~927.04MHz)

• Open-source SIK firmware

• Plug-n-play for Pixhawk Standard Flight Controllers

• 1W maximum RF output

• The Easiest way to connect your controller and Ground Station

• Interchangeable air and ground radio

• 6-position JST-GH connector

Specifications

• 2-way full-duplex communication through adaptive TDM UART interface

• Transparent serial link

• MAVLink protocol framing

• Built in FT230X/FT231 USB to BASIC UART conversion IC

• Supply voltage: 7~28V DC via XT30

• Transmit current: 12V/400mA at 30 dBm

• Receive current: 12V/30mA

• Serial interface: 3.3 V UART

• Single 1W

  • 1W Radio modules with antennas *1

  • High-gain omnidirectional antenna *1

  • Male Type-C to male Type-C USB cable *1

  • Male XT30 to female XT30 adapter cable *1

  • Male XT30 to female XT60 adapter cable *1

  • JST-GH-6P to JST-GH-6P cable *1 (for Pixhawk Standard FC)

  • Rubber damping grommet *3

• Pair 1W

  • 1W Radio modules with antennas *2

  • High-gain omnidirectional antenna *2

  • Male Type-C to male Type-C USB cable *1

  • Male XT30 to female XT30 adapter cable *1

  • Male XT30 to female XT60 adapter cable *1

  • JST-GH-6P to JST-GH-6P cable *1 (for Pixhawk Standard FC)

  • Rubber damping grommet *3

Telemetry-Radio-V3-Quick-Start-Guide

Some Tips:

https://ardupilot.org/copter/docs/common-configuring-a-telemetry-radio-using-mission-planner.html