IFlight IPower GM5208-12 Hollow Shaft Brushless Gimbal Motor With AS5048A Encoder

IFlight IPower GM5208-12 Hollow Shaft Brushless Gimbal Motor With AS5048A Encoder for DSLR/ CANON 5D2 /5D3 Cameras Stabilization

• The GM52 series motor by iPower Motors is the ultimate brushless gimbal motor for DSLR / CANON 5D MARKII, MARKIII Cameras.

• This motor is designed for large-scale multi-rotor platforms looking to lift Red Epic & DSLR sized gear – 4KG/cm Torque.

• The principle of the camera stabilization using brushless direct drive motors, In fact, gimbal based on BLDC motors is very similar to regular gimbal based on hobby servo.

• Model: GM5208-12

• Motor Out Diameter: Ф63±0.05mm

• Configuration: 12N/14P

• Motor Height: 22.7±0.2mm 

• Motor Height: 30.7±0.2mm (Included with Encoder housing)

• Hollow Shaft(OD): Ф15-0.008/-0.012 mm

• Hollow Shaft(ID): Ф12+0.05/0 mm

• Wire Length: 610±3mm

• Cable AWG: #24

• Motor Weight: 209±0.5g

• Wire plug: 2.5mm dupont connector

• No-load current: 0.09±0.1 A

• No-load volts: 20V

• No-load Rpm: 456~504 RPM

• Load current: 1A

• Load volts: 20V

• Load torque(g·cm): 1800-2500

• Motor internal resistance: 15.2Ω±5%（Resistance varies with temperature）

• High voltage test: DC500V 10mA @1sec

• Rotor housing runout: ≤0.1mm

• Steering (axle extension): clockwise
  

• High-low temperature test:

• High temperature: Keep at 60℃ for 100 hours, and the motor can work normally after 24 hours at room temperature

• Low temperature: Keep at -20℃ for 100 hours, and the motor can work normally after 24 hours at room temperature

• Maximum power: ≤40W

• Working Voltage: 3-5S

• Working temperature: -20~60℃;10~90%RH

• 1 x iPower GM5208-12 Gimbal Motor /  1 x iPower GM5208-12 Gimbal Motor With AS5048A Encoder